14. Install Steering Wheel Batteries
(Note: Batteries not included)
●
Loosen the screw in the steering
wheel and remove the cover.
●
Insert 2 x 1.5V size AA AM-3 or LR6
batteries as shown.
●
Replace the cover and tighten the
screw to secure it in place.
Battery Safety Information:
Batteries may leak fluids that can cause chemical burn injury or ruin your product.
To avoid battery leakage:
●
Install batteries correctly, observing the polarity (+,-) signs to avoid leakage.
●
Do not mix old and new batteries.
●
Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (Ni-MH).
●
Remove the batteries from the battery compartment when the unit will not
be used for an extended period of time.
●
Always remove exhausted batteries from the battery compartment.
●
Do not dispose of batteries in
fire.
●
Do not short circuit the supply terminals.
●
Replace the batteries when the horn sounds distorted.
●
Non-rechargeable batteries are not to be recharged.
●
Use only batteries of the same or equivalent type as recommended.
●
If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
●
Remove rechargeable batteries from the product before charging.
●
Battery chargers used with toys must be examined regularly for damage to
the cord, plug, enclosure and other parts. In the event that such damage is
found, the toy must not be used with the battery charger until the damage
has been repaired.
11
12. Seat Assembly
●
Insert the tabs on the
the
back of
seat
into the slots in the
vehicle body.
●
Insert two M4x12 machine
screws, and
tighten securely
with a screwdriver.
13. Rear Bar Assembly
Insert the rear bar onto the tail of the
vehicle in the correct direction as
shown, and push down on the rear bar,
to secure it on the vehicle as shown
(using two 4x12 round head screws).
●
Содержание DOC McStuffins
Страница 8: ...PARTS DIAGRAM 7...
