background image

6. Dashboard Assembly

 

Insert the tabs on the dashboard into slots at 

top of front car body as shown.

 

Use four 4x12 round head screws to secure 

the dashboard.

 

9

3. Driving Wheel Assembly

 

Slide the gear box through the axle into the 

vehicle body, make sure the motor and motor 

power wire are inserted into  the vehicle body.

Note: The gear box must be installed onto the 

Right side of vehicle (riding position).

 

 

Slide the driving wheel onto the axle and make 

it match up with the gear box.

 

Slide the wheel cover onto the axle (make sure 

that the tabs on the wheel cover are fitted into 

the holes on the driving wheel).

 

 

.

e

l

x

a

 

e

h

o

t

n

o

 r

e

h

s

a

w

 

0

1

Ø

 

a

 

 

 

e

d

il

S

 

 

Install the M10 locknut and tighten it. 

 

 

.

p

a

c

 

e

l

x

a

 

e

h

n

e

t

s

a

F

NOTE:

 

Assemble the rear wheel on the other side in the same way that the front wheels are 

assembled. Please refer to the front wheel assembly information at page 8.

2

5. Vehicle Body Support Assembly

 

Install the vehicle body support into the 

proper position on the 

the 

front of 

vehicle body

m

as shown, ake sure the direction is correct. 

 

Secure the vehicle body support

 with seven 

.

s

w

e

r

c

s

 

d

a

e

h

 

d

n

u

o

r

  2

1

X

4

 

4. Steering Column Assembly 

 

Turn the vehicle body upside down.

 

 

Slide a  Ø10 washer onto the steering column, 

then insert a split pin into the hole on the straight 

end of the steering column to secure the washer 

(by opening the pin ends). <see figure 4-1>

 

Insert the straight end of the steering column 

through the hole in front of vehicle body until it 

sticks out of the hole on the top of the car body 

<see figure 4-2>; then insert the bent end into the hole on the steering bracket that 

connected to the front wheel axle <see figure 4-3>.

 

Slide another    10 washer onto the steering 

column and secure it with another split pin 

(by opening the pin ends as shown).<see 

figure 4-4> 

7. View Mirrors

 

 Assembly

 

Insert the view mirror into the hole in 

the vehicle body and push until you 

hear this click into place. 

 

Repeat for the other side. 
 

Ø

Содержание DOC McStuffins



























Отзывы: