Frequently Asked Questions
S7090 Satellite PVR– Use with Satellite Dish Only
Troubleshooting FAQ’s
Q. Message on TV says “No signal”
A. Either it is because of a faulty LNB or the satellite dish is not aligned correctly or the coax cable is
damaged
Q. TV picture is pixellating while watching live TV or cannot get any channels.
A. It is because of weak signal which can be due to:
1. Old LNB which is drifting frequency or
2. LNB skew not correct or
3. Dish not aligned correctly or
4. Coax cable damaged or
5. Signal split to too many rooms
Q. Cannot record a second channel.
A. The loop cable may not be fitted between tuners at the back. Connect loop cable from
LNB 1 Loop
Out
to
LNB 2 Sat In
. Refer to page 6 of this user manual.
Q. What does LCN mean.
A. LCN stands for Logical Channel Numbering. This keeps all the channels in the correct order.
Q. Cannot get EPG
A. Use the
Grey
button below the letters EPG on your remote to access the EPG.
Q. The
Lock
light is on
A. This indicates signal is good and you can view all channels
Q. Not responding to remote / receiver locked up.
A. Power spike can lock the processor, Power you unit off and on from the wall to make it work again.
Before returning the unit back to your supplier:
1. Do a factory reset by going to MENU>Installation>Factory Reset> Pin 0000. Retune and test again.
2. Check Software version by Clicking MENU>CONFIGURATION>VERSION>SOFTWARE VERSION and
check on www.dishtv.co.nz if not latest please follow the instructions on the web site to update to
the latest software version.
3. If problem persists please call Dish TV on 0800 DISH TV (0800 3474 88) or email [email protected]
31
Содержание Freeview Satellite Digital
Страница 1: ...User Manual satB x ultra S7090PVR...