Dish TV AerialBox ultra T1050PVR, Руководство пользователя

Страница: 15 / 33

Main Menu - System Configuration -
Wakeup Timer/Version
15
Wakeup Timer
You can set a service to be recorded at a specific time. Even if the digital receiver is in standby mode, it will start
recording at a specified time. When the recording comes to the end the unit will stay in standby until you press
the standby button. A maximum of 8 timers can be set at once.
1. Set the
Timer Mode
to
Once
,
Daily
or
Weekly
to make a recording. If this option is set to
Off
, the timer will not
operate.
2. Set the Wakeup Mode to Recording, Services or Message. If you only want the unit to wake up on a channel at
the set time without recording, set this to Services
3. Set the channel you want to record, or set the message you want to appear at the set day and time.
4. Set the Date option to a desired date, on which the digital receiver will turn on. Use the left, right buttons on
your remote to navigate and change. The date format is Day/Month/Year.
5. Set the start Time option to a desired time, at which the recording will be started. Use the left, right and
number buttons on your remote to navigate and change. The time format is Hour:Minute.
6. Set the
Duration
option to a desired length of time, in which the recording will be finished. Use the left, right
and number buttons on your remote to navigate and change.
Version
This is an information
page only. Here you
can find your units
Software/ Firmware
version.
Note:
To view the
version page instantly
from live TV press and
hold the
i
button for 3
seconds.