Dish Network ViP 211k, Руководство пользователя

Страница: 61 / 122

Chapter 9
54
Controlling Other Components
Switching Between TV and Device Volume Control
When you set up the remote to control a TV, the mute and volume buttons control the TV
volume. However, if you want to use the AUX mode to control a tuner or amplifier and the
device has a volume setting, you can set up the remote to control the device’s volume
instead of the TV volume. Be sure to set up the remote to control a device in AUX mode
before using this feature.
To set the remote to control the device’s volume :
Instructions Additional Information
2
Press POUND (#) twice.
Watch the mode light to determine your
code. The mode button flashes the
number for each digit of the device
code, with a pause between the groups
of flashes. A quick flash is for zero.
For example, if the code is 570, the mode
button flashes five times, pauses, flashes
seven times, pauses, and flashes once quickly.
For AUX mode: The first group of
flashes tells you what the AUX mode
controls. A quick flash (zero) before the
three-digit code is for a TV; one regular
flash is for a VCR; and two flashes is
for a tuner, or amplifier. For example, if the TV code is 570, the AUX
mode button flashes once quickly (indicating 0
for TV), pauses, flashes five times, pauses,
flashes seven times, pauses, and flashes once
quickly.
For a satellite receiver programmed in
AUX mode: The AUX mode button will
flash the same number of times as the
address number. For example, if the receiver address is 3, the
AUX mode button flashes three times.
For Limited Mode: If you have
programmed a TV or VCR in Limited
Mode, the mode button flashes once at
the end of the flash sequence. For example, if the TV code is 570, the AUX
mode button flashes once quickly (indicating 0
for TV), pauses, flashes five times, pauses,
flashes seven times, pauses, flashes once
quickly, and then flashes once (indicting
Limited Mode).