121716
11
4. Press the
0
number button.
5. Press the
POUND
(
#
) button.
The
TV
mode button flashes three times.
6. Press the
SAT
mode button.
7. Press the plus (+) and minus (-) sides of the
VOLUME
button.
The TV’s volume changes and the
TV
mode button lights
instead of the
AUX
mode button.
R
EMOTE
C
ONTROL
B
UTTONS
C
ONTROL THE
R
ECEIVER
S
AT
M
ODE
B
UTTON
Press this button to set the remote to
SAT
(“satellite”) mode to control
the receiver. The
SAT
mode button’s back light stays lit for about two
seconds to show you’ve set the remote to
SAT
mode. Make sure you
keep the remote in
SAT
mode to use the buttons described here.
TV/V
IDEO
B
UTTON
If you connect the receiver with its back panel
TV ANTENNA/CABLE
IN
and
TV SET OUT
ports, use this button to switch the receiver
between the satellite signal (connect it to the
SATELLITE IN
port) and
another video signal like a cable or broadcast TV antenna input
(connect it to the receiver’s
TV ANTENNA/CABLE IN
input).
Note
: If you connect the receiver to other devices with the phono
(RCA) jacks or the
S-VIDEO
output, you must use the TV
menus to change the input from local broadcast TV to satellite
TV.
text_dishpvr.fm Page 11 Friday, February 28, 2003 1:22 PM
