Remote Control Procedures
113737
Page 21
H
OW TO
C
HECK THE
D
EVICE
C
ODES
You can find out what device code is set for each remote control mode.
Do the following:
H
OW TO
S
WITCH
B
ETWEEN
TV
AND
D
EVICE
V
OLUME
C
ONTROL
If you set up the remote to control a television, the
MUTE
and
VOLUME
buttons — in
most modes — control the TV volume. But if
you use the
AUX
mode to control a tuner or amplifier and the device
has a volume setting, you can set up the remote to control the device’s
volume instead of the TV volume.
6. If the remote reaches the correct code, the device
turns off. If this happens, press the
POUND
(
#
)
button to store the code in the remote.
7. Press the
POWER
button to turn the device
back on.
8. Try some other buttons to make sure they work. Sometimes, the
POWER
button will work but other buttons do not.
1. Press and hold the mode button for the device
you want to control for about three seconds.
When all the other mode button backlights come
on, release the mode button. The mode light will
start flashing.
For example
2. Press the
POUND
(
#
) button twice. The mode
light flashes the number for each digit of the
device code, with a pause between the groups of
flashes. A quick flash is for zero. For example,
the mode light flashes five times, pauses, flashes
seven times, pauses, and flashes once quickly for
the 570 code.
113737_02_text.fm Page 21 Monday, March 11, 2002 3:53 PM
