Dish Network 196812, Руководство пользователя

Страница: 96 / 137

Chapter 11
86
Connecting to Your Dish Antenna
C
ONNECTING TO
Y
OUR
D
ISH
A
NTENNA
Connect your TV to the receiver using the previous sections before connecting the
receiver to the dish antenna.
1
Connect one RG-6 coaxial cable from the LNBF to a DISH Pro Plus (DPP) Separator or a
DISH Pro Plus Triplexer. Connect the DPP Separator or DPP Triplexer to the
S
ATELLITE
I
N
port on the receiver’s back panel.
Note
: If you are installing your receiver in a system with DISH Pro or DISH Pro Plus
LNBFs (and/or switches), you can have as much as 200 feet of cable between the LNBF
and the receiver. You must use RG-6 coaxial cables rated up to at least 2150 MHz.
2
Peel off the blue stickers (found at the beginning of this User’s Guide ) and affix them to the
cable near where they connect to the
S
ATELLITE
I
N
connection on the back of the receiver.
3
Power on the receiver and the TV. Program Remote to Receiver (Step 1 of 5), which is the
first step of the Installation Wizard appears.
4
Using the remote, press SAT and then press RECORD. A number appears in the box on
the screen. Select
Continue
. Download Software (Step 2 of 5) of the Installation Wizard
appears.
5
After the software is downloaded and the receiver has been updated, the receiver restarts.
This process can take 10-25 minutes.
Note
: Step 2 of 5 eventually fails to proceed if your antenna is not pointed correctly. You
may see a pop-up instructing you to make sure that all cables leading to the receiver are
connected securely and correctly. If this is the case, make sure your antenna is pointed
correctly before selecting
Continue
on this screen.
6
On the Set Video Resolution screen, select the best resolution supported by your TV.
Select
Test
. On the confirmation screen, select
Save
.
7
On the Connect Receiver to Ethernet or Phone screen, the system is establishing
connection to broadband or phone. Wait while this process occurs.
8
On the Receiver Setup Complete scren, select
Guide
to display the Program Guide,
select
Live TV
to view live programming, or select
Preferences
to customize the guide
and channel lists (see Customizing the Guide and Channel Lists on page 73).
1-2
3
4
5
6
7
SATELLITE IN SATELLITE IN
Connect receiver
to dish system
Label
cables
Wait as the system
downloads software
and updates the
receiver. When
finished the
receiver restarts.
Select the
best resolution
for your TV.
Select
Test
and
Save
.
Wait while the
receiver connects
to Ethernet
or Phone.
Continue with the
Installation Wizard,
programming the
remote to the receiver.
Select Continue
when finished.
8
Select
Guide
to
view the Program
Guide,
Live TV
to
view Live TV, or
Preferences
to
establish your
preferences.