Dish Network 196812, Руководство пользователя

Страница: 70 / 137

Chapter 9
60
Operating Other Devices
9
Turn the device back on and try some other buttons to make sure they work. If the code
works for other buttons, stop here. Sometimes POWER works when other buttons do not.
If in Limited Mode, try VOLUME or MUTE.
10
If the code does not work, repeats steps 3 through 9 with the next device code from the
insert. Try every code listed for your brand until one works for your device.
11
If you are unable to find a code that works, try Programming Using Device Codes Scan .
Programming Using Device Codes Scan
If the code for your device is not listed in the insert, use this procedure to scan the remote
control’s memory for the device code.
1
Turn the device on, using the device’s front panel buttons or its remote control.
2
Press and hold the mode button until all the other mode buttons light up, and then release
the button. The mode button flashes. For example, hold TV for a TV until all of the other
mode buttons light. When you let go, TV flashes.
3
For AUX Mode only. Press 0 for a second TV, 1 for a second DVD and/or VCR, or 2 for a
tuner, amplifier, or audio receiver. Press STAR(*). This step programs the type of device
that you want to program in AUX mode. If you are not programming in AUX mode, skip to
step 4.
4
Press POWER. Your remote is now in scan mode.
5
Press the UP or DOWN ARROW repeatedly until the device turns off. As you press the UP
or DOWN ARROW, the remote tries each code in the memory to see if it can turn off the
device. When the device turns off, you have found a code that might work.
Note
: The mode button for the device flashes rapidly eight times when you have scanned
all the codes for that device.
6
Press POUND (#). The mode button flases three times if the code was entered correctly.
This stores the code you found.
7
Turn the device back on and try some other buttons to make sure they work. Sometimese
POWER works when other buttons do not. If using Limited Mode, try VOLUME or MUTE.
8
If necessary, repeat this procedure until you have tried all the codes. You may need to
repeat the scan to find the best code for your device.
1
2-3
4
5
6
7-8
Turn
device on
Press UP or
DOWN Arrow
until device
turns off
Press & hold
Mode button
until all Mode
buttons light up
Turn device back
on and test to
make sure code
works
Press
POWER
Press
POUND
DVD
DVD