ESIM120 GPRS USER ManUal
7
3.2. Basic Configuration
The section
Basic Configuration
can be used for performing all the necessary device configurations, i. e., for changing administrator
data, their informational settings, for changing the main password or device system parameters etc. These configurations can be
performed by selecting a respective menu item:
Zone Settings
– Menu section where you can select settings related with device input
control. For more information please refer to chapter 3.2.1.
outputs Settings
– Menu section where you can select settings related with device output
control. For more information please refer to chapter 3.2.2.
User Settings
– Menu section used for entering administrator data, update the main
password and change particular control settings. For more information please refer to
chapter 3.2.3 and 3.2.4.
SMS/Call Settings
– Menu section where you can configure control and informing
settings. For more information please refer to chapter 3.2.4.
GPRS Settings
– This section is used for adjusting GPRS connection settings. For more
information please refer to chapter 3.2.6.
3.2.1. Zones Settings
Zone enable
– Enables/disables status checking of specific inputs.
Zone1 Delay
– Indicates that the system will sense the impulse, transmitted to a particular input, duration if it is longer than
the preset value. The specified parameter must be in the range of 100 – 42000000, counted in milliseconds (1 second – 1000
milliseconds).
text Z1... Z3
– Code name of a particular input. It is recommended to create the name that would most accurately describe the
connected device. The name cannot be longer than 8 characters (you cannot use commas, full stops, semicolons or spaces).
3.2.2 outputs settings
output1... 2 Delay
- Output impulse duration. The default parameter set by the manufacturer is 2 seconds.
Sh1... 8
- The number of scheduler according to which the specified output operates. For more information please refer to chapter
3.6.
