236613ACA
SJ3013 & SJ3014 micro
42
Section 4 – Inspections Before Operation
Operator’s Checklist
NOTE:
Make a copy of this page or go to
www.skyjack.com
for a copy that you can print.
Operator’s Checklist (page 2 of 2)
P
N/A
Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
Platform assembly - Do an inspection for loose, damaged, or missing
components continued
Platform control console
Manual storage box
Lift mechanism - Do an inspection for loose, damaged, or missing
components
Sliders
Maintenance support
Scissor assembly
Scissor bumpers
Rollers
Lift cylinder and pressure transducer
Angle transducer
Function Tests
Do a test of the control module and load sensing module self-check
Do a test of the emergency-stop button on the base
Do a test of the platform/off/base key switch
Do a test of the lower/neutral/raise switch
Do a test of the fl ashing lights
Do a test of the lowering alarm
Do a test of the emergency-lowering function
Do a test of the brake release function
Do a test of the emergency-stop button on the platform
Do a test of the function-enable switch
Do a test of the steer function
Do a test of the drive function
Do a test of the low-speed button
Do a test of the brakes
Do a test of the platform raise and lower functions
Do a test of the horn
Do a test of the lowering warning system -
European (CE) models only
Do a test of the pothole protection device
Do a test of the elevated travel speed
Do a test of the tilt system
2088AC
Page 2 of 2
To
order go
to
Discount-Equipment.com
