Bluetooth operation
1.
Turn ignition to ACC position and radio ON.
2.
Press “
CD
” button on radio. Track or Disc number
displayed only if they are
disc in magazine
otherwise “NO MAGAZINE” is displayed (See
Fig. 27
)
Fig. 27
Radio must be in “CD
Mode” when using the JAG
-HF.
CD Changer remains
connected but will no longer play.
3.
Use radio button to adjust playback level and tone controls.
Music Commands
To
Proceed this way
Pause a Song
Press and release button
Resume Play
Press and release button
Skip to next song
Press button twice
Skip to Previous Song
Press button three times
Activate Aux input*
Press button four times
Activate Voice Control
Press/hold button for 2 seconds
Switch from Aux to Streaming Audio
Press and release button
Phone Commands
To
Proceed this way
Answer call
Press and release button
End call
Press and release button
Reject incoming call
Press button twice (call goes to VM)
Cancel outgoing call
Press button twice
Activate Voice Control
Press/hold button for 2 seconds
Notes:
1.
If audio playback is distorted or low, adjust volume on phone.
2.
To reset Module, press and Hold button for 5 seconds
(this will not
un-pair phone or erase stored phones)
3.
Bluetooth range is approximately 30 ft. make sure device is within
range of receiver
4.
Voice command compatible with Apple (Siri), Android (Google Now),
Blackberry (Assistant)
5.
*Audio controls not applicable in Aux mode. Use the Aux device built-in
control for music selection and controls.
If successful proceed to reverse the removal steps for Amp rack and center
glovebox console and secure the control button/microphone to dash as per step
#6 in
“installing Bluetooth module
” instructions.
Congratulations, you’ve just updated your vehicle to support new technology
while preserving the original radio and dash components.
Enjoy!
