Fig. 24
USB mounting bracket
2.
Insert USB male terminal through hole in bracket (See
Fig. 25
) and
connect to USB port on Module (See
Fig. 21
)
Fig. 25
3.
Snap USB head to mounting plate until flush (See
Fig. 26
)
Fig. 26
4.
Tuck and secure any extra wire away from moving
Bluetooth pairing and connection
This process is required the first time you use the JAG-HF. After initial pairing,
the JAG-HF will automatically reconnect with the paired phone upon entering
vehicle.
1.
Turn the vehicle ignition to “ON”.
2.
Red LED inside module will begin to flash
3.
Access Smartphone Bluetooth menu settings, and search (scan) for
devices.
4.
Select name listed below and tap
“Connect”
Note: Pairs up to 4 phones but connects to one phone at a time.
Warning:
Caller ID and text display are not possible on factory Radio. Operate
Bluetooth device by pressing the control button and your Voice Recognition
applications. Use the radio volume button to control playback level
