3.
Connect harness 8-pin plug (See
Fig. 3
) to
“
CD
”
port (See.
Fig. 4
).
Factory CD changer (if present) must be disconnected.
Fig. 3
Fig. 4
Radio’s 8
-pin changer port
4.
AUX input connection
: Connect supplied 3.5mm audio cable (See
Fig.
5
) to module
“AUX”
jack (See
Fig. 6
). Route and connect other end to
front of the dash or wherever Aux device will reside (within 3 ft.)
Fig. 5
Fig. 6
5.
Optional push-button microphone
: Connect microphone plug to
Module “MIC” input jack and
secure button in location within driver
reach (cable is 6ft. long).
Simply remove tape backing and adhere to
surface.
6.
Standard microphone
: Secure microphone to visor or headliner using
included visor clip (See
Fig. 8)
.
Fig. 8
Microphone
Fig. 8
Visor clip
7.
Carefully route microphones 3.5mm plug down side pillar and behind
the dash and connect to module
“MIC” input
.
8.
Tap adapter harness
RED
wire
to one of two
GREEN/BROWN
a
ccessory wires on radio harness (See
Fig. 9
)
