Operation:
1.
Turn ignition to ACC
and radio “ON”
2.
Press
radio “CD” CHG” or “CHGR”
button to enter AUX mode
3.
Launch smartphone music streaming application
4.
Use media button to change tracks, adjust device volume, pause etc.
5.
Place phone call or ask someone to call.
6.
Adjust call volume with media button, steering wheel controls or radio
volume knob.
7.
To end call press media button,
Pause/Play
8.
To listen to AUX device, press media button
Pause/Play
.
9.
If correct operation is confirmed go ahead and reinstall radio.
Warning:
Playlist and Track selection is *NOT* possible using Becker
radio button. Use audio device built-in controls and display or media
button to access and control audio files and applications.
Notes:
if no auxiliary device is connected, press media button play/stop to
pause streaming media.
Adding additional load to the electrical system in older vehicles can result in
alternator whine or similar noise. For these instances the included
must be installed. (See
Fig. 19
).
Fig. 19
Noise filter installation
Install filter between vehicle supply wires and module as follows:
Connect filter (in) red wire to accessory supply wire (car side)
Connect filter (out) red wire to Bluetooth module red wire
Connect filter (in) black wire to radio ground wire (or radio chassis)
Connect filter (out) black wire to Bluetooth module black wire
