Optional USB “Fast Charge” Kit
(not for thumb drives etc.)
Fig. 17
This USB kit can be added to any vehicle and supports BC1.2, QC2.0, QC3.0, PE1.1,
PE2.0, FCP, SFCP fast charge protocols (Apple, Samsung, Huawei etc.)
Please Note:
iPhone "Fast charge" kicks in when battery capacity is between 0-
79%, and returns to regular charge mode when it reaches 80%.
Should you decide on this add-on, we suggest one of 2 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with support bracket
(Mount USB terminal wherever your installation
demands without drilling)
A.
Flush to Dash or Panel
(drilling required)
Note:
Alternately, user may modify cigar lighter opening
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 18
)
Fig. 18
Step drill bit
2.
Insert male terminal from supplied 3ft. cable (See
Fig. 19
) through hole
created in step 1 and connect to installation harness charging port
(See
Fig. 20
)
Fig. 19
Flush mount 3 ft. USB cable
Fig. 20
USB port
3.
Snap USB cable head (See
Fig. 21
) to hole created in step until flush
with mounting surface (See
Fig. 22
)
Fig. 21
USB head
