Fig. 13
4.
Secure module and proceed to next section
Playback options explained
These options are available at checkout:
1. Retain changer playback
(default)
2. Auxiliary input (instead of changer playback)
Retain Changer playback
:
Default option allows users to retain use of their 6-disc CD auto changer.
Proceed to installation step 3 below.
AUX input
(instead of cd playback)
:
Instead of being able to play CD’s, this option p
rovides an aux input jack for
users to connect and play portable audio devices (e.g., sat radio, Alexa, iPod,
Mp3 etc.)
WARNING:
Aux input options replaces cd playback but the CD auto
changer remains connected and will no longer play.
Connect included 3.5mm audio cable (See
Fig. 14
) to module “AUX” jack
(See
Fig. 15
)
1.
Route audio cable plug to where audio device will reside (within 3 ft.)
2.
Proceed to installation step 3 below.
Fig. 14
Audio cable
Fig. 15
Module
3.
Remove tape backing and attach microphone mounting bracket to
headliner, sun visor etc.; route cable down pillar, under dashboard
toward module location and connect to module “MIC” input.
(See
Fig.
15
)
Wind noise (Convertibles) will negatively affect phone audio. Users are
advised to install microphone away from wind/ventilation ducts etc. or
opt for button microphone seen in
Fig. 16a
Visor microphone
Fig. 16
