Fig. 15
Flush mounted
4.
Tuck and secure any extra wire from moving parts and test operation
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module and
mount USB support bracket (See
Fig. 16
) to surface using adhesive/tape
or screws (included).
Fig. 16
USB mounting bracket
2.
Insert male terminal through hole in bracket (See
Fig. 17
) and connect to
module USB port (See
Fig. 13
)
Fig. 17
3.
Snap USB head (See
Fig. 17
) to bracket until flush (See
Fig. 18
)
Fig. 18
4.
Tuck and secure any extra wire away from moving parts and test
operation (
See Bluetooth Pairing and Connection
)
