2.
Insert supplied 3ft. USB male terminal (See
Fig. 11
) through hole
created in step 1 and connect to install harness USB port (See
Fig. 12
)
Fig. 11
Flush mount 3 ft. USB cable
Fig. 12
Optional USB port
3.
Snap USB extension cable head (See
Fig. 13
) in place and flush with
mounting surface (See
Fig. 14
)
Fig. 13
USB head
Fig. 14
Flush mounted
4.
Tuck and secure any extra wire from moving parts and test operation
B.
Bracket mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module and
mount USB support bracket (See
Fig. 15
) to surface using
adhesive/tape or screws (included).
Fig. 15
USB mounting bracket
2.
Insert male terminal through hole in bracket (See
Fig. 16
) and connect
to optional USB port (See
Fig. 12
)
