PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
This installation guide is provided as a GENERAL installation guide; some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
.
Requirement
Functional CD changer in trunk or hatch
Introduction
Safety comes first when you’re on the road, so having an intuitive and easy to
use Bluetooth kit is essential to reducing driver distraction. The A2DIY-BKRCD
works with virtually all Bluetooth enabled phones and sounds great whether
using for mobile conversations, streaming music and retaining use of required
CD changer.
Keep vehicle, radio and CD changer
while enjoying Bluetooth
features only available on newer cars.
Note
: A working CD changer required and at least one disc must remain in
magazine
. If vehicle does not have a functioning CD changer, purchase our
Installation
Warning:
Most Becker radios are coded and will not operate without the
code. Do not proceed to step 4 if radio code is not available otherwise radio
will not operate upon reconnection.
1.
Remove radio from dash to gain access to the connectors. A set of
removal tools (See
Fig. 1
) is required.
Fig. 1
Radio removal tools
Fig. 2
2.
Slide tools into radio slots
(51)
with straight edge facing away.
Withdraw radio by pulling outwards. With radio removed, press
retaining spring to release keys. See
Fig. 2.
For detailed radio removal instructions, click
3.
Disconnect BLUE plug from radio
C-3
chamber (See
Fig. 3
) (pinch blue
tab to release)
