Introduction:
Many Audi and VW owners don’t have any intentions of buying a
SiriusXM subscription and many don’t use CD’s but eager to find a
way to connect and play their Smartphone or Tablet on the car
system. This is the perfect scenario for the A2D-VW02. The A2D-
VW02 only requires that the vehicle be equipped with an XM
Module or an
external CD Changer**
and uses that port to provide
a wireless connection for any A2DP enabled Smartphone or Tablet.
A wireless connection means no wires, clutter or complicated setup,
simply pair the device and enjoy. SiriusXM Module or external CD
Changer is disabled when the A2D-VW02 is installed.
See Frequently Asked Questions at the end of this guide.
Installation:
Warning!
Although not critical, we recommend disconnecting the car
battery. Keep in mind that many Audi/VW radios are coded and will not
operate without the code. Radio code must be available for radio to operate
upon reconnection.
Remove radio from the dashboard to gain access to the
connector. Round edge radios (e.g. RNS, RCD etc.) must
disassemble dash for removal and instructions are not part of
this guide but available upon request. Square edge Radios (e.g.
Premium 6, 7 etc.) require (4) removal tools (See Fig. 1) which
must be purchased separately.
Fig. 1
Radio removal Tools
1.
To remove radio, slide tools into (4) slots at each corner as
illustrated in Fig. 2. Withdraw the radio by pulling outwards.
Fig. 2
2.
disconnect factory12-way plug (if present) (See Fig. 3 )
Fig. 3
Radio Connectors
