3.
Connect the 12-way plug from adapter (See Fig. 5) into
radio slot vacated in step 2
Fig. 5
4.
Ground adapters black lead. One option is to use one of the
radio screws and secure ground wire to radio chassis.
5.
Secure adapter box and proceed to next section.
Pairing:
The pairing process varies from Phone to Phone but the basic steps
are the same. This process is done upon initial install and will not
have to be repeated
1.
Turn Ignition and Radio “ON”
Blue LED in adapter peephole will flash
2.
On A2DP device: go to
Settings, Wireless & Networks,
Bluetooth Settings
3.
Select
Bluetooth
and turn on.
4.
Then select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for the Bluetooth device name to appear and select it.
Once paired the Blue LED in adapter peephole will glow
steady
Test Operation:
1.
Turn the Ignition and Radio “ON”
2.
Press the “CD” button on Radio
3.
Launch Smartphone or tablet streaming application.
4.
Use the radio volume control button to set the playback level.
Warning!
Playlist and Track selection is *NOT* possible from
the Radio. Use the smartphone built-in controls to access and
control the audio files.
5.
If correct operation is confirmed go ahead and reinstall the
Radio
