Introduction:
If your 2003-12 Honda or Acura does not support music streaming, the A2D-
HON03 updates these radios to support wireless streaming connection from any
Bluetooth enabled Smartphone, Tablet, and Kindle etc. Simply connect module to
14-pin CD changer port on radio, pair Bluetooth device and enjoy the best sound
possible on the car speakers! This new and improved module also offers the
option to retain use of factory installed options such as external CD changer,
slave CD/cassette or satellite radio subscription. The module also works in
vehicle without external devices.
Installation:
(To radio)
Remove radio from dashboard to gain access to connector. (Vehicle
specific radio removal instructions are not part of this guide, but may be
available upon request)
Warning!
Radios with blue 14-pin plug (See
Fig. 2
) are not compatible.
Compatible vehicle must have a white 14-pin connector as seen in
Fig. 1/2
1.
Locate radio
14-pin white connector
(See
Fig. 1
) (usually on back or
bottom)
Fig. 1
Radio 14-pin port
Fig. 2
14-way plugs
2.
Connect module 14-pin plug (See
Fig. 2
) to radio 14-pin port
Note:
If vehicle has Navigation the
separately) is required to retain GPS guidance (prompts)
3.
When retaining XM or External CD change, red wire to accessory
supply must be connected to a 12V accessory supply source in
your vehicle. If not retaining optional device playback (e.g. XM
Radio or external CD player/changer), this step is not required.
