Disc Makers Pico MAC, Руководство пользователя

Страница: 7 / 50

Rev. 111005.1
Page 6
Packing Materials
Please retain the original box and packaging in the event that the unit
requires future servicing. This will help to reduce the possibility of damage
occurring in transit. In the event that the system is shipped back to Disc
Makers without the original box and packaging, customers will be charged
for new box and packaging.
The Best Place To Put The Pico
The best operating location for the Pico duplication system is in a climate
controlled area, free of dirt, dust, humidity, excessive heat, and electronic
or electromagnetic interference. Room temperature should be between 65
and 75 degrees Fahrenheit, or between 18 and 23 degrees Celsius. Place the
Pico on a solid, steady work surface and allow sufficient room for all
incidental work materials. Provide at least three inches of clearance on all
sides of the unit for ventilation.
Safety Precautions
The system is shipped with a three-prong power connector and must be
used with a properly grounded AC receptacle.
DO NOT try to defeat the
third “ground” prong. All computer peripherals must be properly grounded
and the Pico is no exception. The use of a power conditioner such as an
Uninterruptible Power Supply (UPS), or a surge protector is always a good
idea.
Repairs or alterations should only be attempted by authorized factory
trained technicians. Disc Makers reserves the right to void the warranty if
unauthorized service is performed.