Rev. 111005.1
Page 44
Copy and / or Verify
This allows you to start copying or verifying from an image file, or a new master
disc.
1. On the Job Manager TAB
click
new and
select the “Copy and/or Verify” button as
seen in
(fig. 1)
.
2.
Click
“Next”.
3. Select the
Image source
for your job.
This can be an ISC, IMG, or UDF or a
master disc that you place on top of the
blank discs. The Pico will archive (read-
in) the contents of the master and copy
the contents to as many discs as are
indicated in the quantity box. If the Pico
detects another master during the copy
process, the Pico will reject the additional
master. You may also select browse and
choose an existing DISC image.
4. You will then want to choose the
Operations and Options
for your job:
Copy, Test, Writing speed, and Verify,
You will then enter the quantity of discs
toward the bottom of the screen.
5. If you choose “Existing DISC Image” the
file will show in the window, as seen in
(fig. 3)
.
6. Click “Next”.
7. The
Job parameters
will then be
displayed. Give your job a name and
(fig. 1)
(fig. 2)
(fig. 3)
Содержание Pico MAC
Страница 1: ...User s Guide Rev 111005 1...
Страница 14: ...Rev 111005 1 Page 13 Click INSTALL to continue Please wait while the Pico software is copied to your hard drive...
Страница 15: ...Rev 111005 1 Page 14 Installation is complete Click FINISH...
Страница 46: ...Rev 111005 1 Page 45 select a priority 8 Click Finish and the Pico will run the job fig 4...