www.discmakers.com 1-800-237-6666
10
This brief setup guide is provided to get the EliteMicro operational out of the box. Once you get the
system operational, complete online help can be accessed from the DiscJuggler HELP Section.
Step 1
Unpacking the Hardware:
Your EliteMicro system is shipped in one main carton. If you ordered an EliteMicro with printer, you'll
also receive a box with the printer adapter kit and a box with the inkjet printer.
Main Carton w/ EliteMicro
•
USB 2.0 Cable
•
AC Power Cord
•
Printed Manual
•
Installation CD with EliteMicro Software
Printer Adapter Kit Carton
•
Printer Guide Plates (2 pcs)
•
Printer Control Cable
•
Label Printing Software
Carefully open the boxes and remove the top protective cardboard sheet. You will then be able to
remove the contents from the top section of the carton.
Remove the top foam section from the shipping carton. This will reveal the EliteMicro in a plastic bag.
Grasp the EliteMicro on the top section and place the other hand underneath the unit. Gently lift out of
the shipping box and set onto a table.
Remove the EliteMicro out of the bag and place all shipping components back into the shipping
carton for future use.
Next, remove the printer and adapter kit from their shipping carton and place all the components on
the table.
Account for all the components.
NOTE: Any item that needs to be returned for a warranty repair must be returned in original
packaging.
You must call Disc Makers for a return authorization number (RMA) before returning any
product. In the event that the original packaging has been discarded, you can purchase replacement
packaging from Disc Makers. The sender will be responsible for any damage incurred if product is not
returned in original or replacement packaging. To obtain replacement packaging, call Disc Makers
technical support at 1-888-800-4041 with the model of your duplicator.
