18
Cooking
3
Cooking
3.1
Filling
.
1.
Take the appliance off of its base.
2.
Only put so much water or food into the
appliance that the content level is between
the "
MIN
" and "
MAX
" markings.
3.
Close the lid.
4.
Put the appliance back onto its base.
3.2
First use
1.
Fill the appliance with water up to the
"
MAX
" marking (
Z
Chapter 3.1, "Filling"
).
2.
Bring the water to a boil (
Z
Chapter 3.3,
"Daily use"
) and pour it away completely;
repeat this once or twice.
WARNING:
Danger of injury!
Check the appliance before each use. A
damaged appliance must never be used.
WARNING:
Danger of electric shock!
During filling, the underside of the appliance
and the base must by no means get wet –
this could cause a short-circuit of the con-
tacts in the base. Therefore, the outside of
the appliance must also be dry before set-
ting it onto the base.
NOTE:
Take into account that the content level will
rise when other substances besides water
are put into the Hotpot°.
NOTE:
To save electricity, only heat the amount of
water you actually need at the moment.
NOTE:
You may fill the Aquagrad° either through
the filler and spout with the lid closed or with
the lid open. You can open the lid by push-
ing the release catch in the handle "
"
(Fig. 3).
<
3
Aquagrad mit hotpot.book Seite 18 Montag, 13. Dezember 2010 10:26 10
