14
3 Maintenance and care
3.2 Cleaning / changing the exhaust filter
1.
Switch off the appliance (
).
2.
Pull the plug out of the plug socket.
3.
Unlock the exhaust filter cover as shown (Fig. 31).
4.
Remove the exhaust filter using the tab provided (Fig. 32).
5.
Tap the dirt out of the exhaust filter over a dustbin.
6.
Finally, remove the dirt from the exhaust filter with a soft brush,
e.g. the furniture brush supplied with the appliance (Fig. 33).
7.
Press the exhaust filter back into its console until the tab
audibly engages (Fig. 34).
8.
Attach the exhaust filter cover at the bottom first.
9.
Lock the exhaust filter cover (Fig. 35).
3.3 Storage
3.4 Spare parts and accessories
The following accessories and spare parts can be reordered:
Accessory parts and spare parts can be reordered through
Z
Page 46, ‘International Service’
34
click!
35
31
32
33
CAUTION:
Clean the filter each time you clean the dust filter. Replace the filter if it
is damaged or deformed (see
Z
Chapter 3.4, ‘Spare parts and accesso-
ries’
for ordering information).
CAUTION:
The exhaust filter cannot be washed.
NOTE:
The exhaust filter cover can be locked more easily if you hold the
unlocking mechanism (Fig. 35) and only release it once the exhaust fil-
ter cover is in its limit position.
39
click!
37
38
36
40
WARNING:
Danger of injury!
After vacuuming switch the appliance off (
) and wind up the power
cord (
). Hold the plug in your hand while winding up so that the cable
does not thrash about and injure you.
WARNING:
Danger of injury!
Keep the appliance out of the reach of children.
CAUTION:
Never store the appliance next to heat sources (e.g. stoves or radiators).
Avoid direct sunlight. Store the appliance and accessories in a cool, dry
place where it does not take up too much space (Figures 36 – 40).
CAUTION:
If you intend to store the appliance for a long time, empty and clean the
dust container and its filter elements
Z
Chapter 3.1, ‘Emptying the dust
container and cleaning the motor protection filters’
.
Item number
Description
2224001
Filter set consisting of:
1 dual motor protection filter (Fig. 20) +
1 exhaust filter (Fig. 33)
2200004
Filter unit (Fig. 23) consisting of:
1 filter
1 filter cup
M203-5
1 parquet brush
M219
1 mini-turbo brush “Fellino”
M221
1 midi-turbo brush
M232
1 long, flexible crevice nozzle
M236-1
1 hard floor nozzle
CAUTION:
Only use original spare parts from the scope of delivery or those that
you have purchased by reordering.
DD 2224.book Seite 14 Mittwoch, 25. Februar 2015 9:20 09
