Dirt Devil AQUAclean 3 in 1, Инструкция по эксплуатации

Страница: 17 / 218

Preparatory work
Getting to know the appliance
Scope of supply:
Fig.
1
:
1
Handle;
2
Release key for the dual tank;
3
Appliance body;
4
Dual tank;
5
Quick re-
lease hand-held steam cleaner;
6
Telescopic tube;
7
Compact brush;
8
Steam base;
9
Carpet glider;
10
Steam button;
11
On/Off button;
12
Quick release cord;
13
Release pedal of tele-
scopic tube;
14
Steam booster;
15
Wall mount;
16
Accessories bag;
17
360° adapter;
18
Jet nozzle;
19
Soft brush;
20
Spot jet nozzle;
21
2 × Microfibre
pad;
22
Detergent (optional*);
23
Cleaning needle
(optional*)
Fig. 2 :
1
Low disbursement of steam and deter-
gent;
2
Maximum disbursement of steam and deter-
gent;
3
Low steam;
4
Maximum steam;
5
Steam
ready indicator;
6
Program selector key;
7
On/Off button
Unpacking and assembling
1
Check that the unpackaged contents are com-
plete. If you notice any transport damage or if any-
thing is missing, contact your dealer immediately.
2
Attach the telescopic tube onto the steam base
(fig. 3 ).
3
Attach the appliance body onto the tele-
scopic tube (fig. 4 ).
Assembling the wall mount
The wall mount can either be assembled with screws
or the adhesive strips (fig. 5 – 7 ).
Assembly with adhesive strips
1
Position the steam cleaner on the wall. Make sure
that the steam base rests flat on the floor.
2
Remove
the adhesive strips (fig.
5
).
3
Latch the wall mount
to the steam cleaner.
4
To attach the wall mount,
press the handle with the wall mount against the
wall (fig. 7 ).
Assembly with screws
1
Latch the wall mount to the steam cleaner.
2
To
determine the position of the wall mount, hold the
wall mount with the steam cleaner against the wall.
Make sure that the steam base rests flat on the floor.
Now remove the steam cleaner while holding the
wall mount in position.
3
Use the screws included in
the scope of supply to attach the wall mount (fig. 6 ).
Filling the dual tank
WARNING!
Hot surface! Fill the dual tank only after the appli-
ance has cooled down.
Removing the dual tank
1
If the dual tank must be filled during the cleaning
process, switch off the steam cleaner (fig.
2
/
7
) and
allow it to cool down.
2
Press the release key for the
dual tank (fig.
1
/
2
) and remove the dual tank from
the appliance body (fig. 8 ).
3
Place the dual tank
on a level surface.
Filling up with water
NOTE:
Only fill water in the water tank. Do not add de-
tergents or any other additives to the water tank.
1
To open the tank lid of the water tank
(fig.
9
/
2
), pull on the tab of the tank lid.
2
Fill the
water tank and close the tank by pressing the tank lid
back in place.
Filling up with detergent
CAUTION!
Use only the detergent ordered from us.
1
To open the tank lid of the detergent tank
(fig.
9
/
1
), pull on the tab of the tank lid.
2
Fill the
detergent tank to the filling line with water.
3
Add
the detergent until the tank is full.
4
Close the tank
by pressing the tank lid back in place.
Inserting the dual tank
1
Make sure that the water filter is correctly insert-
ed, (fig.
10
).
2
Position the bottom part of the dual
tank in the appliance body and push the dual tank
into the catch until you hear it click in place.
Connecting appliance to power supply
1
Make sure that the steam cleaner is switched off
(fig.
2
/
7
).
2
Unwind the cord completely from the
quick releases (fig.
1
/
12
).
3
Insert the plug into a
mains socket.
!
EN
21