DirekTronik ZXT-120 страница 26 Скачать руководство пользователя | Manualshive

Страница: 26 / 28

background image

25

Checking Accessories

After opening the cover of the packing box, check that the following accessories are
included.
- ZXT-120 (Z-Wave-to-AC IR Extender)

- USB cable

- Screws (bottom cover) x 2pcs

- User Manual

- AC Code List

- Warranty sheet

FCC Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Notice: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user authority to operate the
equipment.

«
...
24
25
26
27
28
»

Содержание ZXT-120





























Отзывы:

Нет отзывов

Похожие инструкции для ZXT-120

VERSA PERFORMANCE BLENDER

Бренд: Oster Страницы: 14

Бренд: Black+Decker Страницы: 20

Бренд: Bialetti Страницы: 110

Бренд: Lakeland Страницы: 20

Бренд: Nikrans Страницы: 21

Crush VT-1462 W

Бренд: Vitek Страницы: 32

Бренд: ALASKA Страницы: 22

USB-NX2-LOCAL-1G

Бренд: Crestron Страницы: 7

DP-Vision-Fiber-AR

Бренд: G&D Страницы: 148

Бренд: PureLink Страницы: 16

Бренд: Globalmediapro Страницы: 16

Бренд: Robot Coupe Страницы: 19

BLENDER EXPRESS BPE3

Бренд: Back to Basics Страницы: 28

Бренд: Sage Страницы: 88

Бренд: D-Link Страницы: 16

Prestige blender

Бренд: OBH Nordica Страницы: 28

Бренд: OBH Nordica Страницы: 44

Бренд: Converters.TV Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды