DirekTronik ZXT-120, Руководство пользователя

Страница: 10 / 28

IR Code Learning
In case none of the code on the code list works for the targeted air conditioner, user can
use IR code learning function using configuration according to below steps:
- Different brand or model of air conditioner has different function. For example,
o o
some air conditioner only support temperature set from 18 C - 30 C, if user set
o
17 C on gateway, ZXT-120 will not respond.
- There are more than 1 code for each brand, some does not support heat, if user
selected a code that does not support heat but the original air conditioner supports
heat function, please continue to try next code until the correct one is selected.
- You can record down your device code for future reference after setting up the
ZXT-120 correctly.
AC device programmed to your ZXT-120
Code no.:
- If none of the code works on the target air conditioner, or the air conditioner brand
is not shown on the code list, please select code "000" for IR code learning (refer
to instruction of IR Code Learning)
Important Information
9
Step
1 Go to configuration setting page on the
gateway or ZRC-100 and input parameter
number "27" and parameter value "000" to
select the dedicated AC code number "000"
for learning.
Setup Key LED Indication Status
on ZXT-120
- LED flashes twice when
Z X T - 1 2 0 r e c e i v e s t h e
configuration setting.