Operating Instruction
33
In the parameter configuration area, select the serial port number that the serial line
connects to the PC
Baud rate: 115200 (default)
Data location: 8
Stop bit: 1
Check bit: no
Enter Port Command in Send options.
Instructions:
All commands start from “#”, command head “%c”: “d” parameters.
The “_” in the commands cannot omit. Parameter: %d: 0 means ALL.
Command head & Parameter1 &Parameter2... need to add one “SPACE”.
The following table is only an example. Please refer to the list of instructions.
Type
format
data
Rule
instructions
#video_%c
d:data
Target 1
in%8,d
0~7:assign port
255:all port
parameter 2 attributes are available
Target 2
out%8,d
0~7:assign port
255:all port
All parameter attributes are available
Parameter 1
source=%d
0~7: input channel
Parameter 2
onoff=%d
0:image output turn off
1:image output turn on
Please refer to the " Command list" for details
Example: ALL output turn off.
Operation format: #video_d out255 onoff=0
Содержание 20111545
Страница 1: ...Operating Instruction 1 8x8 HDMI2 0 Matrix Support 4K 60hz YUV4 4 4 18Gbps HDR Best nr 20111545 ...
Страница 28: ...Operating Instruction 28 Input information display picture 55 ...
Страница 35: ...Operating Instruction 35 Change IP address interface picture 57 ...
Страница 45: ...Operating Instruction 45 14 CONNECTION DIAGRAM ...
