DirekTronik 20111545, Руководство по эксплуатации

Страница: 17 / 47

Operating Instruction
17
①
Select“Config”, Press“ENTER”
②
Press “UP” “DOWN” button to select“Network”, Press“ENTER”
③
Press “UP” “DOWN” button to select“DHCP”, Press“ENTER”, you can select“Yes/On”to turn
on/off DHCP
④
Press “MENU”, Select“IP/MASK/GW/Port/DNS/MAC”, Press“ENTER”
⑤
Such as change IP address: After select IP, enter and select Part 1~4, then Set IP address parameters
for each part; Press “Enter” again, LCD ’ll show the current network parameters. (Do the same for
other parameters)
Network parameter settings interface(picture-24)
DHCP settings interface (picture-25)
IP settings interface (picture-26)