DirekTronik 20101782, Руководство по эксплуатации

Страница: 8 / 33

8
Note 1: The funtion of Right/Enter in the remote controller is the same as the
"Right/Enter" on the panel.
7.2 Video Setting By Panel Control
Press the "Source" button to select the input from Type-C
→
DVI
→
HDMI1
→
HDMI2.
Note: 1.The video switching OSD interface only shows four output channels and the
current input signal channels, and it can only switch one input source to all output
channels when the input and output are both connected to the device.
2. No operation for 20S, the OSD interface turns off, press any button to wake it.
OSD interface
OSD video menu
7.2.1 Video Switching
Press "Menu" on the panel to enter the "Switching" menu,
Press "Up/Down" to select the input, Press "Menu/Enter" to confirm or back to the
previous menu,
The selected one has a "@" to mark.
In1
→
Type-C input, In2
→
DVI input, In3
→
HDMI input1, In4
→
HDMI input2; the
default input is HDMI input1.