DirekTronik 20101782, Руководство по эксплуатации

Страница: 17 / 33

17
It contains set up for " DHCP ON/OFF "; "IP Address"; Mask"; "GW"; "DNS"
Eg: IP address setting:
1) Modify the IP to 192.168.1.100, press the "up" and "down" to select IP [0], IP [1],
IP [2], and IP [3] to enter the next sub-item (each sub-item can be set from 0 to
255), press the the "up" and "down" again to select "192", "168", "1", and "100"
respectively, and click "ENTER" to confirm.
2) After confirming the IP address, press the "up" and "down" keys to select
"Apply", and press the "ENTER" to enter and select "YES" to check whether the
modification is successful.
3) Note: 1. The operation steps of IP / MASK / GW / DNS setting are basically the
same;
4) The above parameters can be modified manually under static DHCP, otherwise it
cannot be modified.
5) The modified parameters need to conform to the network protocol, otherwise it
cannot be modified and it will only display "Setting IP error" in the interface.
TCP/IP main interface
DHCP ON/OFF