DirecTV R10, Руководство пользователя

Страница: 97 / 165

87
6
S e t t i n g s
Satellite Settings
Options under Satellite Settings affect the basic functioning of the DVR. Most of these
settings were established before or during Guided Setup, and you may not ever need to
change them.
Repeat Guided Setup.
After selecting this, you need to enter a safety code (press
THUMBS DOWN three times, then press ENTER). This option lets you repeat Satellite
Dish Guided Setup. For more information, see page 21.
Test Satellite Signal Strength.
This screen shows approximate pointing information for
your satellite dish antenna. You can also use this screen to check the strength of the signal
received from each transponder on a selected satellite dish antenna. It shows you the
signal strength from individual transponders one at a time. To be sure you receive all of
your channels, you should check signal strength on all transponders.
A transponder is a piece of radio equipment on a satellite. The DIRECTV transponders
receive information from DIRECTV and rebroadcast it to your satellite dish antenna.
Different channels are rebroadcast by different transponders, and different satellites have
different numbers of transponders.
You can check signal strength while you adjust the pointing of your satellite dish antenna.
The signal strength meter on this screen provides audio feedback—a tone that becomes
higher pitched as the signal gets stronger. You may be able to turn the volume on your TV
up so you can hear the tone while you adjust the position of your satellite dish antenna.
Alternatively, you might have someone watching the signal strength meter and then
reporting through a cell phone or walkie-talkie to the person who is adjusting the satellite
dish antenna.
DIRECTV Central Messages & Setup Settings Satellite