DirecTV R10, Руководство пользователя

Страница: 101 / 165

91
6
P h o n e S e t u p
Phone Dialing Options
Set Dial-In Number.
Use this to change the number the DVR uses to connect to the DVR
service. To change it:
1. Select “Set Dial-In Number.” The Area Code screen appears.
2. Use the number keypad on the remote to set the area code, then press SELECT. If you
change the area code, or if the DVR has not made a call in the last twenty-four hours,
the
Update Numbers screen appears and the DVR calls the DVR service to retrieve a
list of local dial-in numbers. After the call, press SELECT.
3. The Dial-In Number screen appears. Use the UP/DOWN arrow to choose one of the
listed phone numbers. The DVR will use this number to connect to the DVR service.
Then press SELECT.
If your area code has no access numbers, you can press LEFT arrow to return to the
Area Code screen and try a nearby area code. Toll charges may apply and are your
responsibility.
4. The Dialing Format screen appears after you have chosen a dial-in number. You
should use this screen to tell the DVR which dialing format to use. For example,
should the dial-in number be preceded by your area code and should a “1” precede the
area code? In some areas, even local numbers must be dialed using the area code. Press
SELECT to return to the Phone Dialing Options screen.
To test your new dial-in number, select “Test Phone Connection Now.” The Test
Phone Connection screen appears and a test phone call begins. When the call
completes, you should see the message “Test Succeeded!” Press SELECT to return to
Phone Dialing Options.
DIRECTV Central Messages & Setup Settings Phone Setup