DirecTV HIRD-E4, Руководство пользователя

Страница: 72 / 90

HUGHES BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
P
AGE
7-12
channels were excluded or included due to the digital satellite receiver’s analysis process. You
may edit the lists manually to correct these oversights.
Clear
You may decide to remove all channels from a particular list later on. Selecting Clear will allow you to
clear all channels from a chosen list. You may then add channels back in.
Set
If you decide to include all channels in a particular list, selecting Set will allow you to specify the list.
You may then remove channels from this list if you so choose.
Things to do in the CHANNEL LISTS screen
Tag Boxes
The four columns of small boxes on the right hand side of the screen are the Tag Boxes. The first three
columns are the lists traditionally known as
Fav.A , Fav.B , and Fav.C . The farthest right hand column
is the Family list.
In the CHANNEL LISTS screen, use the , , , and keys to highlight the button that corresponds
to the channel number and list that you wish to change. Press the key to add or remove the
check mark, which indicates that the channel in that row is included in the list shown at the top of the
column.
To help you decide whether to include or exclude a certain channel, the title of the currently airing
program for that channel will appear at the top of the screen.
Remember that when the digital satellite receiver is locked, only channels in the Family list can
be viewed.
This means that even though a channel appears on the Fav. A , B , C , or All Channels list,
the selected channel must also be on the Family list in order to see or hear it.
For the Family List limit to be in force, the digital satellite receiver must be locked. Locking is
described earlier in this chapter. When the system is locked the passcode will be needed to modify the
settings of the channel lists.
TurboTune™
The TURBOTUNE SETUP screen is used to specify which nine channels that will appear in the
TurboTune pop-up panel that shows over video when is
pressed.
Things to do in the TURBOTUNE
SETUP screen
Set Channel
Using the , , , and keys, highlight one of the nine channel
boxes. You can enter the desired channel using the number keys on
the remote control, or by using the
and . Pressing while
highlighting one of the channel boxes will also initiate a pop-up
panel that will allow you to set the channel using the and keys
on the remote control or the digital satellite receiver’s front panel.
The TURBOTUNE setup screen