page 22 of 32
MI6 Manual - Version 1.1
CHAPTER 4: Operation
Isolate
For a quick individual check of the 16 audio channels the ‘ISOLATE’ function mutes
all signals from the mix (all ‘MUTE’ leds are blinking). Pressing the <MUTE> push
button of a single channel re-enables its signal to the mix (‘soloing’).
ISOLATE
LED (red) - indicates the state of the ‘ISOLATE’
function.
(OFF) - ISOLATE inactive
(ON) - ISOLATE active
ISOLATE
Push button - toggles ‘ISOLATE’ function between
ON and OFF.
Press to activate / deactivate ISOLATE.
Isolate Properties
• Deactivating ‘ISOLATE’ resumes to the previously activated mute settings.
• Isolates are not stored in the background;
i.e. all channels are muted initially when ‘ISOLATE’ is activated.
NOTE!
If ‘ISOLATE’ is active when the device is switched off, the ‘ISOLATE’ function is
resumed and its selection is preserved after switch on.
WARNING!
Toggling <MUTE> or <ISOLATE> may result in abrupt changes of loudness.
