page 15 of 32
MI6 Manual - Version 1.1
CHAPTER 3: Installation
Do not connect voltage sources to the analog outputs. This may cause damage at
the output stages. Observe the technical specifi cations listed in this document.
5.
Connect the signal cables for the analog and AES3 audio signals to the
DSUB-9 adaptor. Connect the adaptor to the DSUB-9 plug at the rear panel.
The adaptor converts from DSUB-9 (male) to:
• 2 x XLR male (Line Out L/R)
• 1 x XLR male (AES3 output)
• 1 x XLR female (AES3 input).
WARNING!
6.
Optional: Connect a USB cable to the USB port for fi rmware updates.
This requires the USB Serial driver (Windows) being installed fi rst.
The driver and the installation instructions are available at
www.directout.eu
.
