DirectOut Technologies ANDIAMO 2.AD, Руководство по оборудованию

Страница: 40 / 44

page 40 of 44 D.O.TEC
®
ANDIAMO 2.AD Hardware Guide - Version 1.0
DirectOut Technologies
®
Appendix B: Confi guration Examples
© 2013 DirectOut GmbH
Appendix B: Confi guration Examples
Example 1:
Clock source is ‘word clock’ with termina-
tion enabled. Conversion of channels 01-
32. MADI input 2 is selected and in sync.
Sample rate is 44.1 kHz and the analog
reference levels are set to ‘low’ (-9 dB) for
the input.
Clock source is set to internal clock gen-
erator. Conversion of channels 01-32
(i.e. all channels)*. No MADI input signal
detected. Matrix Mode is active.
Sample rate is 96 kHz and the frame
mode is set to 96 kFrame at the MADI
output. The analog reference level is set
to ‘high’.
Clock source is the MADI input signal.
Conversion of channels 33-56 (A/D)*.
Both MADI inputs are in sync, MADI 2 is
selected.
Sample rate is 44,1 kHz. The MADI out-
put channel format is set to ‘56 ch’. So
the MADI output signal feeds 56 chan-
Example 2:
Example 3:
nels only. The analog reference level is set to ‘high’.
*) The setting ‘56 ch’ affects the MADI output signal only.
*) As the scaling factor is set to 2 FS, the number of available channels in the MADI signal is
reduced to 32 channels.