DirectOut Technologies ANDIAMO 2.AD, Руководство по оборудованию

Страница: 23 / 44

page 23 of 44 D.O.TEC
®
ANDIAMO 2.AD Hardware Guide - Version 1.0
DirectOut Technologies
®
CHAPTER 4: Operation
© 2013 DirectOut GmbH
level settings
The sensitivity of the converter can be switched between two set-
tings (high and low).
The nominal levels of ANDIAMO model A, B or C correspond to
0 dB
FS
.
Two LEDs inform about the sensitivity that can be adjusted for the
analog input.
high lEd (green): indicates the adjusted
sensitivity of the converter.
LED ON = +15 dB
U
(+18 dB
U
/ +24 dB
U
)
low lEd (green): indicates the adjusted
sensitivity of the converter.
LED ON = +6 dB
U
(+9 dB
U
/ +15 dB
U
)
With the level setting to “low” a digital gain (input) is applied to adapt
the lower analog level (-9 dB).
The model of the ANDIAMO 2.AD is a confi gure to order option. It is
marked at the rear panel of the device.
ANDIAMO 2.AD - SC / SC version (optical / optical)
ANDIAMO 2.AD - BNC / SC version (coaxial / optical)