Directed PS-3655EFM, Руководство пользователя

Страница: 14 / 15

P.14 User Guide
Press AUX 2X QUICK
¾
AUX
¾
START/STOP: ................. STOP
Press AUX 2X QUICK
¾
AUX
¾
TRUNK: ........................... TRUNK
NOTE: Pressing the AUX button 2x quickly causes the LED to flash slowly and to shift to level 1
(AUX 2, configurable by your installer). Pressing the AUX button 3x quickly causes the LED to
flash fast and to shift to level 2 (second car operation).
AUX 2
If configured at installation, press twice quickly on the AUX button, then once on the button
while the LED is slowly flashing to activate AUX 2.
OEM ­ Style Alarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the
ignition.
•
To arm the OEM-style alarm, press the button on the transmitter.
- The OEM-style alarm will ONLY arm if the button on the transmitter is pressed.
- The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now
armed.
•
To disarm the OEM-style alarm, press the button on the transmitter.
- To stop the horn from sounding if the OEM-style alarm is triggered, press the or
button, or put the system in and out of Valet Mode (page-9)
Intrusion Codes via horn
The system monitors the following:
•
Doors
•
Hood
•
Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of 1 minute.
If an intrusion has occurred and pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
Diagnostic table:
1x = power interruption
4x = Doors intrusion
3x = Hood 6x = Ignition