background image

 

P.10

 

User Guide 

Using the TRANSMITTER (Remote Valet Mode): 
1.

 

Press the 

 and 

 buttons simultaneously until the parking lights flash twice

2.

 

The LED on the antenna will flash rapidly, indicating that the vehicle is now out of Valet 
mode. 

 
If someone attempted to remote-start the vehicle while in Valet Mode; the parking lights will turn 
ON, then OFF, then will flash twice

Panic

 

Mode

 

Note:  Panic mode can only be activated if the horn has been adequately configured by the 
installer. 
In an emergency situation, you can activate panic mode by pressing and holding the AUX button 
for more than 3 seconds, until the horn starts honking. If the vehicle is under a remote start, the 
engine will shutdown automatically before setting off the horn. You can stop the horn by pressing: 

 (this will lock your doors and deactivate panic mode), or 

 (this will unlock your doors and deactivate panic mode). 

Furthermore, the panic mode can be stopped by activating Valet Mode (page 9) 
 
* Panic Mode will automatically shut down after 30 sec. 

Quick

 

Lockout

TM

 

(Also called Secure Panic.) For fast protection in emergency situations, the system will LOCK all 
doors when you press the brake pedal while you hear the Horn sounding. (Quick Lockout is only 
available when panic mode has been set off.) 

Cold

 

Weather

 

Mode

 

If the vehicle has a manual transmission,  Ready mode  (page 6)  should be set before entering 
Cold Weather mode. When Cold Weather Mode is active, the engine starts every 2 hours and runs 
for 3 minutes (or for 8 or 20 minutes with diesel engines). Cold Weather Mode automatically ends 
after 24 hours (or 12 starts). 

To enter Cold Weather Mode: 

 

Rapidly press AUX twice. The remote’s LED will start flashing. 

 

Press and hold   until the parking lights will flash for 2 seconds, pause, and then flash 
3 times. 

To exit Cold Weather Mode, do any one of the following actions: 

 

Open the hood. 

 

Start the engine by remote. 

 

Turn the ignition key to the IGNITION ON (RUN) position. 

 

Rapidly press AUX twice. The re mote’s LED will start flashing. 

 

Press and hold   until the parking lights will flash for 2 seconds, pause, and then 

 flash 

twice

If Safe Start is enabled, you can activate Cold Weather Mode by: 

 

Pressing and releasing the   button, then; 

 

Pressing and holding the   button until the parking lights flash 3 times. 

 

Содержание PS-3655EFM
















Отзывы: