background image

 

User guide 

P.13

 

“Home

 

Valet

TM

 

Mode

 

If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if 
the vehicle is parked indoors there is no danger of it starting accidentally by remote control. If the 
vehicle has a manual transmission, it should be set into ready mode before activating the Home 
Valet™. 

Note: Once the Home Valet Mode is activated, the vehicle will not start by remote, but the 
OEM alarm functions will remain active.  

To take the system into home valet mode: 

1.

 

Press the 

 or   button. 

2.

 

Within 3 seconds, press the 

 and   buttons simultaneously for 3 sec. 

3.

 

The P-lights will flash once 

To take the system out of home valet mode: 

 

Turn the ignition key to the IGNITION ON (RUN) position. 

The system will warn you if someone attempts to start your vehicle while it stands in home valet 
mode. The parking lights will: 

Turn ON then OFF; then 
Flash twice, pause; then 
Flash twice again. 

AUX

 

1

 

Note: This 500 mA negative Aux 1 output can be used for many different applications 

Priority door: 

This great feature allows the user to unlock solely the driver’s door with a single press of the 

 button on the transmitter, and to unlock the other doors, if desired, by pressing the 

 

button for a second time. 
The output will provide a 1-second negative output when the 

 button is pressed a second 

time on the transmitter.   

Horn Confirmation: 

AUX 1 can be programmed to trigger the horn every time the 

 button is pressed, or when 

the 

 button is pressed twice within 3 seconds. When horn confirmation is activated, panic 

mode is enabled. If horn confirmation is disabled, panic mode will not be available. 

Horn

 

Chirp

 

Timing

 

The pulse duration can be configured by your installer (from 5 ms to 200 ms). 

Multi

­

car

 

Operation

 

This option allows the owner of two vehicles, both equipped with the same remote starter model, to 
control both systems with a single remote control. To control the second vehicle: 

Press TRUNK LOCK buttons simultaneously: .................... LOCK 
Press TRUNK UNLOCK simultaneously: ........................... UNLOCK 
Press TRUNK START/STOP simultaneously: ....................  START 
Press TRUNK START/STOP simultaneously: ....................  STOP 

Or 

Press AUX 2X QUICK 

¾

 AUX 

¾

 LOCK: ..............................  LOCK 

Press AUX 2X QUICK 

¾

 AUX 

¾

 UNLOCK:......................... UNLOCK 

Press AUX 2X QUICK 

¾

 AUX 

¾

 START/STOP: ................. START 

Содержание PS-3655EFM
















Отзывы: