7
Directed Digital Solutions HYUNDAI4
© 2017-10-12 Directed. All rights reserved.
Analog harness (H3), 18-pin white connector
Conn./Pin
Color
Description
H3/1
Lt. Blue/Red
No Connection
H3/2
Black/White
(-) Parking Brake Input (Manual Transmission)
2
H3/3
Gray
(-) Hood Input
2
H3/4
N/A
No Connection
H3/5
Gray/Black
(+) Glow Plug Input
2
H3/6
Violet/White
(AC) Tach Input
2
H3/7
Dark Blue
(-) Door Lock Output
1
H3/8
Brown/Black
No Connection
H3/9
Red/White
(-) Trunk Release Output
1
H3/10
White/Green
(-) Door Input
2
H3/11
Yellow/Green
(+) Door Input
2
H3/12
Blue/Red
No Connection
H3/13
Light Blue
(-) Trunk Trigger Input
2
H3/14
Pink/Yellow
(-) Activation (Start Trigger) Input
H3/15
Dark Green
(-) Door Lock Output
1
H3/16
Brown/White
(+) Brake Input
2
H3/17
Brown
(+) Siren Output
1
H3/18
Blue/White
(-) Push-To-Start 2 Output
1
MC501 harness (H4), 8 thick-gauge wires (optional)
Conn./Pin
Color
Description
H4/1
Pink/White
No Connection
H4/2
Red/White
No Connection
H4/3
Pink
No Connection
H4/4
Red
No Connection
H4/5
Orange
No Connection
H4/6
Red
No Connection
H4/7
Green
No Connection
H4/8
Violet
No Connection
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
2. These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide" on page 5 for a
list of compatible features.
3. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
4. The Green wire is only required for starter kill and anti-grind applications.