7
DS4+ TL10
© 2017-05-29 Directed. All rights reserved.
Wiring connections
The wiring connections listed below are specific to this firmware.
Main harness (H1), 12-pin black connector
Conn./Pin
Color
Description
H1/1
Blue/White
Relay 1 N.C. – SIL Interrupt (vehicle side)
1
H1/2
Blue/Red
Relay 1 N.O. – No Connection
1
H1/3
Blue
Relay 1 COM – SIL Interrupt (connector side)
1
H1/4
White/Brown
Relay 3 N.C. – No Connection
1
H1/5
White
Relay 3 COM – (+) Starter 2 Output
1
H1/6
Red
(+) 12 Volt (Battery)
H1/7
Lt. Green/Red
Relay 2 N.O. – No Connection
1
H1/8
Lt. Green
Relay 2 COM – Autolight Interrupt (vehicle side)
1
H1/9
Lt. Green/White
Relay 2 N.C. – Autolight Interrupt (connector side)
1
H1/10
Black
(-) Ground
H1/11
White
Relay 3 COM – (+) Starter 2 Output
1
H1/12
Red
(+) 12 Volt (Battery)
Relay harness (H2), 10-pin white connector
Conn./Pin
Color
Description
H2/1
N/A
No Connection
H2/2
Red/Black
(+) 12 Volt Input (Accessory/Starter)
H2/3
Pink/Black
Relay N.C. – Flex
1
H2/4
Pink/White
Relay COM – Flex
1
H2/5
Red
(+) 12 Volt Input (Ignition)
H2/6
Green
Relay COM – (+) Starter
1
H2/7
Violet
Relay N.C. – (+) Starter
1
H2/8
Orange
Relay COM – (+) Accessory
1
H2/9
Red/White
(+) 12 Volt Input (Flex)
H2/10
Pink
Relay COM – (+) Ignition
Data harness (H3), 8-pin white connector
Conn./Pin
Color
Description
H3/1
Tan
HS CAN 1 Low
H3/2
Tan/Black
HS CAN 1 High
H3/3
Orange/Brown
HS CAN 2 Low
H3/4
Orange/Green
HS CAN 2 High
H3/5
Lt. Green
No Connection
H3/6
Violet/Brown
No Connection
H3/7
Orange/Black
RDA
H3/8
Yellow/Black
SIL Data
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.