6
© 2016 Directed. All rights reserved.
Remote Control Pairing
Once this Control Center has been installed, it must be paired
with the installed Control Module. Use the following procedure to
prepare and pair the system.
Compatibilities
RF Kit Part #
Included in RF Kit (XL202 not included)
Remote Part #
Antenna Part #
9856V/P/X
(1) 2-way LED 7856V/P/X &
(1) 1-way 7656V/P/X
6826T
9656V/P/X
(2) 1-way 7656V/P/X
6826T
Remote Pairing the 5-Button 2-way and Companion Remote Controls
with a 4X10/5X10/4X06/5X06 System
1
Open
at least one vehicle door.
Open
door
2
Turn
the ignition to the ON position.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
3
Within 10 seconds,
press
and
release
once and
then
press
and
hold
the system’s Control Center
button. The status LED begins flashing in a se-
quence of 1 flash and the siren/horn (if connected)
sounds to confirm the system is ready for pairing.
Flashes
&
&
Press & Release
Press & Hold
&
Confirmation
Tones
4
Release
the Control Center button.
Release
5
Hold
the Function
button on the remote until it emits
a long beep and its LED turns ON solid (approxi-
mately 8 seconds).
Release
the
Function
button.
Solid
Release
Press &
Hold
&
&
&
Confirmation
Tones x1
