16
© 2016 Directed. All rights reserved.
System Features
Valet Mode
Valet Mode can be entered and exited by performing the Remote
Valet command or manually perform Emergency Override using
the vehicle key and the Control Center button. When entered, the
security functions are defeated. Arm and Disarm commands Lock
and Unlock the doors. The Responder LE emits the Arm in Valet
and Disarm in Valet output as described for Arm and Disarm in the
Basic Commands section.
Use the following steps to manually enter and exit Valet Mode:
1.
Turn
the ignition switch ON and then OFF.
2. Immediately
press
and
release
the Control Center button
once.
3. The Control Center LED turns ON when entering Valet and
OFF when exiting Valet.
Power Save
To reduce power consumption the Control Center status LED mod-
ifies its output if the vehicle is parked for an extended period. If
Armed the flashing is reduced after 24 hours. When Valet Mode
is ON the LED turns OFF after 1 hour and resets each time the
ignition is turned OFF.
Rapid Resume
If power is ever disconnected by a mechanic or thief, the system
will resume the state it was in at the time of disconnection, when
power is reconnected.
Out of Range
Each time a command is performed the 2-way Responder LE ex-
pects a command confirmation from the system. If a command
confirmation is not received the
and transmit LED’s flash and a
