5
© 2016 Directed. All rights reserved.
Mounting the Control Center
The Control Center’s position should be discussed with the vehicle
owner prior to installation since the antenna, with built-in Status
LED and Valet/Program button, must be visible and accessible to
the driver of the vehicle.
The best position to locate the Control Center is centered high on
the front windshield. It can be mounted vertically or horizontally
relative to the windshield. Metallic window film and in-glass an-
tennas can affect range negatively, so this should be a consider-
ation when determining the mounting location.
After determining the best mounting location, follow these steps:
1.
Clean
the mounting area with a quality glass cleaner or alco-
hol to remove any dirt or residue.
2.
Plug
the cable into the Control Center.
3.
Mount
the Control Center with the supplied double-sided
tape.
4.
Route
the cable down the window pillar, being careful to
avoid airbags, and
plug
the cable in the Control Module.
CONTROL CENTER
CABLE
CONTROL
MODULE
